Stefan Wendler

mpfshell. A simple shell based file explorer for ESP8266 Micropython based devices ⛺

micropython-mfrc522. (Micro)Python class to access the MFRC522 RFID reader

libemb. "libemb" is a collection of libraries which try to make things needed in many STM32 (ARM-Cortex-M3) or MSP430 (MSP430G2553) based projects more convenient. It includes an API for the Nordic nRF24l01+ modules.

rpi-kmod-samples. Set of example kernel-modules for the Raspberry Pi (includes basic module sample as well as samples for GPIOs, GPIO-interrupts)

ediplug-py. Simple Python class to access a "EDIMAX Smart Plug Switch SP-1101W"

msp430-harduart. Hardware UART example for MSP430G2553 on TI Launchpad using mps430-gcc on Linux

stm32-pwm-servo-sample. Sample showing the usage of timers for PWM generation on the STM32 with libopencm3

pyscmpd. Python based sound-cloud music server talking MPD protocol.

msp430-spi-nrfreg. Example on how to read registers of the Nordic nRF24l01+ radio through SPI on USCI_B of MSP430G2553

msp430-softuart. Software UART example for MSP430 using mps430-gcc on Linux

msp430-i2cslave. MSP430 I2C slave example (for MSP430G2553 on Launchpad) including master example (e.g. for TP-Link MR3020)

lattice-logic-sniffer. Simple 8 port logic sniffer written in Verilog for the Lattice MachXO2 Breakout Board.

atom-microbit-micropython. Microbit Micropython support package for Atom editor

msp430-pwm-servo-sample. This example shows how to use TIMER_A0+A1 PWM with a MSP430G2xx3 MCU. It controls two servos on P1.6

stm32-rob01. Firmware for STM32 based autonomous robot “rob01″

ywasp. YWasp is a firmware for STM32 ARM-Cortex-M3 microcontrollers for "arifaying" a serial line over an Nordic nRF24l01+ module.

rcswitch-kmod. Linux Kernel Module to control 434Mhz based RC switches through sysfs.

install-propeller-toolchain. Simple shell script to install Parallax-Propeller toolchain, including the BST tools and the Propeller GCC.

msp430-standalone-sample. Running MSP430G2xxx stand alone (without Lauchpad), use Launchpad for in circuit programming

usherpa-firmware. uSherpa is a micro-controller firmware (currently for the MSP430G2553) which helps in quickly adding a micro-controller to a more powerful embedded system (e.g. the MIPS based Carambola or the ARM based beaglebone).

pyesp8266. Python API to the ESP8266 WiFo to serial module.

scratch-pynetsense. Python library provides a simple to use client implementation for implementing scratch networking sensors.

atom-stlink. Flash your STM32 / stlink V2 device from Atom with stlink

tinr2d2. Simple tin can based, R2D2 like robot with 3D printed parts, using a Parallax Propeller

tpvfitplay. A simple commandline tool which take one or more FIT files as input and outputs the ride data from the FIT file into a TrainingPeaksVirtual (TPV) compatible broadcast format.

rcswitch-fpga. RC Switch Send - Verilog Module to Operate 434MHz RC Switches

usherpa-pysherpa. This library provides a Python binding to a microcontroller (e.g. the MSP430G2553) running the uSherpa firmware.

xzrem. Example of How to Control Digital Outputs of Remote XBee using Java and XBee API

msp430-ebunny. This is just a quick little Easter hack. This firmware for the MSP430G2231 makes two glass Easter bunnies glow through a PWM.

carambot. Simple Python script for Carambola SoC to drive a 4-wheel robot remotely

srf05modweb. This project provides a kernel module and a web service to access the SRF05 ultra sonic range finder from a Linux based device (e.g. TP-Link MR3020).

nano-pixel-client-electron. An electron applicatoin to access a 8x8 neopixel matrix via BLE as exposed by nano-pixel-firmware