SB Components

HackyPi-Software. HackyPi is a compact and versatile USB device powered by the RP2040 microcontroller. It is a powerful tool for both ethical hacking and learning programming, compatible with all major operating systems. You can program using python language.

HackyPi-Hardware. HackyPi is a compact and versatile USB device powered by the RP2040 microcontroller. It is a powerful tool for both ethical hacking and learning programming, compatible with all major operating systems. You can program using python language.

MotorShield. Designed to help you get your Raspberry Pi based Robot. This board can control DC motor as well as the stepper motor. You can connect your IR and Ultrasonic sensors to tell your robot about its environment. You can easily make your Line Following, Object following, Wall following, Maze-Solver Robots.

RoundyPi. RoundyPi is a round LCD display based on RP2040 along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyPi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.

RoundyFi. RoundyFi is a round LCD display based on ESP-12E along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyFi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.

PiArm. DIY Robotic Arm with 6 DOF based on Rasberry Pi

Raspberry-Pi-Pico-Breadboard-Kit. Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard” on top, a Programmable Buzzer, 4 Programmable LEDs, 4 Push buttons, and dedicated 5V, 3v3, and GND pins at a single place.

RangePi. Range-Pi is a low cost portable “Plug and Play LoRaTM Dongle” based on Raspberry Pi RP2040 and LoRaTM Modules, comes with an onboard 1.14" LCD that covers 433/868/915 MHz frequency band to enable data transmission up to 5 KM.

Lora-HAT-for-Raspberry-Pi. Pi LoRa™ Lora Hat is a low-power consumption data transmission board, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S/E22-400T22S SMA antenna connector that covers 868MHz/433MHz frequency band ,IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

PiSquare. PiSquare is an RP2040 and ESP-12E-based board that allows you to use multiple Raspberry Pi HATs without stacking them on top of one other. PiSquare uses Socket programming to wirelessly communicate multiple Raspberry Pi HATs ("n" numbers of HATs).

StackyPi. StackyPi is a compact and advanced board that is designed with the RP2040 Micro-controller, which provides one set of 2x20 pin headers on which you can connect Raspberry Pi HATs. It means that one can plug HAT designed for Raspberry Pi and run it via the Pico Zero RP2040 that would make the user perform the advanced functions on it.

UPS-Hat-RPi. UPS Hat is a 5v power supply, It fit at the top of the raspberry pi, it gives power backup, while raspberry pi's USB power is cut off. It has various protections like short circuit protection, reverse battery protection and indicator, overcharge/discharge protection, and over current protection. It has a 5V USB output, convenient for powering other boards.

PiBeam_Software. PiBeam is a DIY USB transceiver device that can be programmed to control and manage your computer, gaming console, or multimedia system. An in-depth setup and working guide for PiBeam is available on this github.

UHF_Reader_ESP-32_Software. This github page provides a getting started guide and other working details for the UHF reader for ESP32. The UHF Reader for ESP32 is a rapid multi-tag reading device for efficient and effective inventory management.

Air-Monitoring-HAT. SB Components developed the Air Monitor HAT for Raspberry Pi an open-source portable sensor that has the ability to provide the level of quantity of the suspended particulates with their mass.

Raspberry-Pi-Pico-RFID-Expansion. Raspberry Pi Pico RFID Expansion is the latest technology in the range of SB Component products boasting an advanced RFID Reader at the frequency of 125KHz

Micro_RP2040. Micro RP2040 - a small and compact version of the popular Raspberry Pi Pico. This github includes Micro RP2040 Hardware Details and resources.

RS485-CAN-HAT. RS485 CAN HAT is a multi node communication module, to communicate with devices in a long-range, designed dedicatedly for Raspberry Pi with an operating voltage of 3.3 V, CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230 that is controlled via UART.

PiMecha. PiMecha is a Raspberry Pi Humanoid Robot with 17 DOF

Usb_To_LoRa_Dongle_Software. USB to LoRa is a robust and versatile USB to LoRa that allows you to connect without limits. Its excellent range and simple connection allow you to converse with devices up to 5 kilometres distant.

Scangenie_Software. This GitHub page offers a step-by-step tutorial for using ScanGenie.

SB-RFID-HAT. This is a Raspberry Pi RFID HAT Module operating in the 125Khz frequency range. It supports two communication interfaces: UART for RFID and I2C for Oled Display.

Round-LCD-HAT. Round LCD HAT is a 1.28-inch display expansion board module of 240×240 resolution, 65K RGB colours, clear and colourful displaying effect, with a joystick, designed for Raspberry Pi to expand its engagement via SPI communication by providing standard 40 pins GPIO interface.

Spi-Box. Motion Activated Security Camera based on Raspberry Pi 2/3/3B+. User can capture images or videos based on motion and email the captured images/videos.

PiTalk_5. PiTalk with 5" LCD

PICO-CUBE. Pico Cube is a 4x4x4 LED cube HAT for Raspberry Pi Pico with 5V DC operating voltage. Pico cube, a monochromatic( Red, Blue, Green) LED with 64, is a fun way to learn programming.

ReadPi_NFC_Software. ReadPi 13.56 MHz frequency based NFC Reader/Writer powered by Raspberry Pi Pico W unit. This github provides getting started guide and other working details for ReadPi NFC version.

PICO-LORA-EXPANSION. Pico LoRa™ Expansion is a low-power consumption data transmission board, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S/E22-400T22S SMA antenna connector that covers 868MHz/433MHz frequency band , Onboard 1.14" LCD,IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

USB-RTC-Software. USB RTC is an open source real time clock device that comprises MCP2221, a USB-to-UART/I2C serial converter, which enables USB connectivity, in the processes that include a USB, UART(Serial), GPIO, and I2C interfaces.

Scangenie_Hardware. The hardware design files for ScanGenie are available on this GitHub.

PiCube. PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Components.

PiRelay. PiRelay provides a solution for controlling high current/voltage devices and makes your home appliances intelligent. It could be a nice solution for controlling devices that could not be directly controlled by RPi's Digital I/Os. Standardized shield form factor enables smooth connection with Raspberry Pi and compatibles.

IoTPi_Software. IoTPi is an industrial board that consists of onboard RP2040, ESP8266 WIFI(ESP-12E) and RS-485 communication that can control up to 4/6 appliances/devices on a load of, photo-coupling isolation Optocoupler EL357NC, allowing users to safely control high voltages or current devices.

UHF-HAT-for-RaspberryPi-Software. UHF HAT for Raspberry Pi is an advanced and compact "Ultra High Frequency" RFID reader that consists of powerful RFID technology designing for a broad range of applications in the defense, healthcare system, banks, offices etc. UHF HAT for Raspberry Pi has an onboard ThingMagic® M6E Nano UHF RFID Reader that is JADAK’s smallest embeddable module with ultra-low power consumption and tiny form factor. This RFID reader is ideal for battery operated, low-cost, small form factor portable devices.

Raspberry-Pi-Pico-Relay-Board. Raspberry Pi Pico Relay Board is developed by SB Components with the potential to control up to 4 appliances and loads up to 240V AC@ 7A, 30V DC@ 10A.

EncroPi-Software. It is an innovative and highly efficient USB RTC stick based on the Raspberry Pi RP2040 microcontroller. It is a power booster product for all electronic enthusiasts and time setters. We have designed EncroPi in such a way that its powerful and advanced features will help you in your projects seamlessly.

PiCoder-Software. A compact and comprehensive Raspberry Pi Pico W based Learning Kit having onboard actuators, sensors, and LEDs makes learning enjoyable. The PiCoder is loaded with many features that are going to help you learn and explore many opportunities in the field of computer science and electronics.

Lo-Fi_Software. This GitHub page offers a step-by-step tutorial for using Lo-Fi. Lo-Fi combines ESP32S3 with LoRa to establish long-range wireless communication in challenging situations in addition to WiFi and BLE capabilities.

PiRelay-V2. PiRelay-V2 is developed by SB Components with the potential to control 4 appliances and loads up to 20V AC/ 7 A, 30V DC/ 10A to provide a way to control the high voltage/current devices.

Pico-Sense-HAT. Sense HAT for Raspberry Pi Pico is a four-sensor environment monitoring device that measures temperature, air quality, humidity, and colour. The Sense HAT board is perfect for the environment monitoring project since it has multi-sensors with the ability to measure temperature, humidity, air quality and colours.

Pico-WiFi-HAT. Pico WiFi HAT is a compact and easy-to-use WiFi HAT for the Raspberry Pi Pico that includes an ESP8266 module.

MessengerPi_Software. Powered by the Raspberry Pi Pico RP2040, MessengerPi combines walkie-talkie and LoRa modules for versatile wireless communication. This GitHub provides getting started instructions for MessengerPi.

PiTraffic. PiTraffic- Educational Traffic Light Add-on Shield HAT for Raspberry Pi

Pitalk_4G_HAT_Software. The PiTalk 4G HAT is a handy, low-power Raspberry Pi HAT that features multi-communication functionalities such as GSM, GPRS, TCP, etc. It allows your Pi to easily make phone calls, send messages, connect to wireless networks, and so on. It is the most convenient IoT HAT that works with all variants of Raspberry Pi (model A, B and Zero). The users

Audio-Codec-Hat-for-Raspberry-Pi. Audio Codec HAT is a low-power, high-quality stereo CODEC designed for portable digital audio applications which are based on WM8960 IC that have the advantages like Low leakage, excellent PSRR, and pop/click suppression mechanisms that allow direct battery connection to the speaker supply. Flexible speaker boost settings allow speaker output power to be maximized while minimizing another analog supply current.

USB_Type_C_to_LoRa_Dongle_Software. The LoRa Dongle is ideal for anyone wishing to develop long-distance wireless communication in a variety of applications. This github repository has a working guide for a USB C to LoRa Dongle.

IoTFi-4G-Hardware. IoT-Fi is a compact low power IoT enabled device having the capability of GSM modules (SIM868/SIM7600G-H) for providing network connectivity via using sim card and having the power of RP2040 chip. It also consists of an LCD 1.14” display, ESP32-C3, a 3.5mm jack for audio I/p - o/p, SD card and SIM card slot.

AiryFi_Software. AiryFi is an open-source portable sensor that can deliver the quantity and mass of suspended particulates. It includes a PMSA003 sensor that uses a digital output with a 5V working voltage to offer information on suspended particulate matter (PM1.0, PM2.5, and PM10) in the air per unit volume.

Power-Monitor-HAT. 3 Channel current/voltage moinitor HAT for Raspberry Pi using I2C or SMBus interface.

PiFinger. PiFinger, the first-ever Fingerprint HAT for Raspberry Pi Comprise of onboard Nuvoton MCU with an on-chip crypto-accelerator, Cortex-M23 TrustZone, and XOM facilities. A user can use the communication protocol to the PiFinger with commands over the UART protocol with the Baud rate 115200 bps or USB 2.0 full speed.

Trekko_Hardware. This GitHub provides hardware design files for the Trekko - Pico GPS Logger.

Trekko_Software. This Github provides a getting started guide and other working details for the Trekko - Pico GPS Logger.

AiryFi_Hardware. AiryFi is an open-source portable sensor that can deliver the quantity and mass of suspended particulates. It includes a PMSA003 sensor that uses a digital output with a 5V working voltage to offer information on suspended particulate matter (PM1.0, PM2.5, and PM10) in the air per unit volume.

PiCoder-Hardware. A compact and comprehensive Raspberry Pi Pico W based Learning Kit having onboard actuators, sensors, and LEDs makes learning enjoyable. The PiCoder is loaded with many features that are going to help you learn and explore many opportunities in the field of computer science and electronics.

Barcode-Scanner-Breakout-Software. The DE2120 scanner module, buzzer, and micro-USB connector make up the Barcode, a sturdy and compact barcode scanner board. It can scan 20 distinct barcode symbologies in the 1D and 2D symbology segments, such as barcodes and QR codes.

Rotary_ESP32S3_Powered_Software. This GitHub page offers interfacing and getting started guide for Rotary Encoder Powered by ESP32 S3.

GPS-Hat-for-Raspberry-Pi. The extremely compact and powerful GNSS module GPS HAT for Pi is a concurrent receiver module that integrates GPS with the BeiDou system. It's pin-to-pin compatible with Quectel's GNSS module L76 and can receive both GPS and BeiDou open service L1 signals at the same time. GPS HAT for Pi can acquire and track any mix of GPS and BeiDou signals thanks to its 33 tracking channels, 99 acquisition channels, and 210 PRN channels. When compared to utilizing simply GPS, enabling both GPS and BeiDou doubles the number of visible satellites, reduces the time to first fix, and improves positioning accuracy, especially in congested urban areas.

Pico-2G-Expansion. Raspberry Pi Pico 2G Expansion is a QUAD-Band GSM/GPRS/GNSS Expansion designed dedicatedly for Raspberry Pi Pico with UART, USB 2.0 Interface, 850/900/1800/1900 MHz.

UHF_Reader_Pico_W_Software. This github page provides a getting started guide and other working details for the UHF reader for Pico W. The UHF Reader for Pico W is a rapid multi-tag reading device for efficient and effective inventory management.

Micro-Bit-Motor-Driver. A motor driver module designed for the BBC micro:bit. This module can drive 2 DC motors and 3 Servo motors.